Xantrex Technology 300 PLUS Power Supply User Manual


 
Using the Air Compressor: XPower Powerpack 300 Plus
22
4. Open the thumb latch and remove the valve connector
from the valve stem.
5. Check air pressure with a pressure gauge.
Inflating Small Sports Equipment
You can use the compressor to inflate small sports equipment
such as balls (soccer balls and footballs) and small air
mattresses.
To inflate small sports equipment:
1. Place the valve connector fully on or into the valve
receptacle on the item. Go to Step 4.
OR
If necessary, use a supplied nozzle adaptor.
2. Choose the appropriate nozzle adaptor, insert the nozzle
adaptor into the valve stem and close the thumb latch.
3. Insert nozzle adaptor into the valve receptacle of the
item.
4. Turn the compressor on and inflate to appropriate
pressure.
Note: Leave the thumb latch in the open position for
storing to relieve pressure on the internal mechanism.
CAUTION
The XPower Powerpack cannot be used to inflate large
capacity inflatables such as float tubes, large air
mattresses, and inflatable boats. These types of products
require extended inflating times which may damage the
compressor.
CAUTION
Allow the compressor to cool down for 10 minutes after
each 10 minutes of continuous operation.