Filter
Top Products
Installation
12 975-0052-01-01 Rev A
Additional Possible Requirements
The modem at the inverter location may need to be DC
powered if it is necessary to connect to the inverter during a
fault condition where the inverter has shut off its AC output.
Advanced Monitoring Software
The ICA was developed to change the Sine Wave Plus
Inverter/Charger raw data output to an RS232 protocol
output. The ICA code only manipulates the inverter’s control
panel keypad strokes. The included software emulates these
keystrokes.
There are companies that have used these keystroke bits of
information (coming from the ICA) to develop advanced
monitoring software that provides monitoring and data
logging capability. Additional information on these programs
can be found at www.righthandeng.com or
www.mauisolarsoftware.com.
Important:
Xantrex Technology Inc. assumes no responsibility
for the use or function of these advanced monitoring software
programs.