Filter
Top Products
7 Remove the plastic cap from the port on the back of the scanner and put it in a
safe place.
8 Plug the cable from the adapter firmly into the small port on the back of the scanner.
9 Switch on the scanner and then switch on your Macintosh.
The scanner may make some sounds as it calibrates and warms up. After
about 20 seconds, the adapter and scanner are ready to use.
Handling film
To protect your valuable film from fingerprints, grease, and so on, wear
gloves. Most photography supply stores sell gloves designed for handling film.
Remove the
plastic cap.
Insert the
connector
cable.
141
Using the Transparent Media Adapter