Filter
Top Products
2.3 <
System setup>
Duplex
Margin
In this menu, you can set the margins for double-
sided printing. You can increase or decrease the
value in 0.1 mm increments.
• Top Margin: Set the top margin, from 0.0 to 9.9
mm. The default is 5.0 mm.
• Left Margin: Set the left margin, from 0.0 to 9.9
mm. The default is 5.0 mm.
• Short Binding: Set the bottom margin of the
back of the page for short binding, from 0.0 to 22
mm. The default is 0 mm.
• Long Binding: Set the right margin of the back
of the page for long binding, from 0.0 to 22 mm.
The default is 0 mm.
Item Explanation
Paper menu
Use the Paper menu to define all settings relating to print material input
and output, as well as the specific print material you are using with your
printer.
Item Explanation
Copies
Set the default number of copies by selecting any
number from 1 to 999. The default is 1.
Paper Size
Select the paper size currently loaded in tray.
• Custom Paper: You can configure the size for
your own custom paper. Set the width from 98
mm to 216 mm, and the height from 148 mm to
356 mm.
Paper Type
Select the paper type currently loaded in tray.
Paper
Source
Using this item, you can set which tray you want to
use.
• Auto: The printer can automatically determine
the source.
• Manual Tray: The printer uses MP Tray.
• Tray 2: Available only when optional tray is
installed.
Tray
Chaining
When you select any other value except Auto from
Paper Source and the selected tray is empty, the
printer automatically prints from other trays.
If this menu item is set to Off, the Status LED lights
red and the printer doesn’t work until you insert
paper into the specified tray.
Values: 1 ~ 999
Values: A4, A5, A6, JIS B5, ISO B5, Letter,
Legal, Executive, No.10 Env., Monarch Env., DL
Env., C5 Env., C6 Env., US Folio, Oficio,
Custom Paper
Values: Plain Paper, Bond, Transparency,
Envelope, Labels, Card Stock, Preprinted,
Color, Cotton Paper, Recycled, Achive, Thick,
Thin
Values: , Tray 1, Tray 2, MP Tray,
Manual Tray, Auto
Values: Off, On