Filter
Top Products
5-30 WorkCentre Pro 421 User Guide
Loading the Bypass Tray
The Bypass Tray can be used for a variety of different media.
It is located on the right side of the machine.
To change the paper size for the Bypass Tray, it must be
selected from the Control Panel.
Load the media in the Bypass
tray.
Slide the guide until it is just
touching the edge of the stack.
NOTE: Ensure that the maximum
fill line is not exceeded.
NOTE: The Bypass tray is
extendable to accommodate short
edge feed sheets or larger paper
sizes.