Filter
Top Products
SUBMITTING PRINT JOBS USING WINDOWS NT 4.0 DRIVERS
GUIDE TO SUBMITTING JOBS FROM THE CLIENT 5-31
Specifying halftoning options
If you are printing complex graphics such as photographs or detailed
images, you can specify values for halftone frequency and halftone
angle. The default values should work in most cases.
Caution: Unless you are experienced with using halftones, you
should not change these values.
To specify halftoning options:
1. From the Advanced Options dialog box, click the number of
lines per inch that you want to use for halftone screens in the
Halftone Frequency box, and a value for the angle of the pattern
you want to use in the Halftone Angle box.
2. Specify any other options you want.
3. Click [OK].
Specifying printing resolution
To specify the resolution at which you want to print graphic images:
1. From the Advanced Options dialog box, open the Resolution
(DPI) list and click the resolution you want to use.
2. Specify any other options you want.
3. Click [OK].
Note: The halftone frequency and halftone angle settings can be
set and saved with the corresponding resolution in a multi-resolution
printer such as the 96, 4635 or 180 NPS.
Specifying the format for sending TrueType fonts to your printer
If you are using TrueType fonts in your documents and your printer
supports downloaded fonts, you can specify the format for
downloading TrueType fonts as follows:
1. From the Advanced Options dialog box, open the Send To
Printer As list and select the method you want to use.
2. Specify any other options you want.
3. Click [OK].