Filter
Top Products
PRINTING USING XEROX UTILITIES AND LPR UTILITIES (DOS AND UNIX)
GUIDE TO SUBMITTING JOBS FROM THE CLIENT 3-21
-C“(<nostitch | nostaple>)” (for models 4050/40904850/4890/92C
NPS only)
Specifies that the document is not stapled after it is printed.
-C“(nto1)”
Asserts that the document is in descending order, regardless of
the number specified for the first or last page.
-C“(<orientation>)”
Specifies the page orientation you want to use. Accepted values
are “portrait,” “landscape,” “inverseportrait” (“iportrait”), or
“inverselandscape” (“ilandscape”). This option is valid for ASCII
jobs only.
-C“(<paper size>)”
Specifies the paper size. Acceptable values are “USLetter,”
“USLegal,” or “A4.”
-C“(pcd)”
Specifies that plex changes specified in the PCL or PostScript
code will take effect.
-C“(pcl)”
Specifies PCL for the job.
-C“(pcl5c)” (for models 4850/4890/92C NPS only)
Specifies PCL5c for color PCL5 jobs.
-C“(pcl5e)”
Specifies PCL5e for monochrome PCL5 jobs.
-C“(pr=<n>-<m>)”
Specifies the page range to print of the job. Starting page is <n>.
Ending page is <m>.
Example: lpr -P locust -C“(pr=3-5)” test.ps
-C“(ps)”
Uses the language level specified in the Default PS Language
Level option.
-C“(ps1)”
Specifies PostScript level 1 for the job.
-C“(ps2)”
Specifies PostScript level 2 for the job.
-C“(reprocessforcopies)”
Specifies that page images already processed for the first copy
do not get stored as reserve-pages to be used for subsequent
copies. Instead, the interpreter will “reprocess” the job for
subsequent copies.
-C“(res=300)” for models 4050/4090 NPS and 4850/4890 NPS
-C“(res=600)” for model 92C NPS
-C“(res=300)” or -C“(res=600)” for models 96/4635/180 NPS
Specifies the resolution in dots per inch (dpi).