Filter
Top Products
SUBMITTING PRINT JOBS FROM QUICK PRINT FOR WINDOWS NT 4.0
6-16 GUIDE TO SUBMITTING JOBS FROM THE CLIENT
Specifying paper stock for the document
Follow these steps:
1. From the Setup window, click the [Paper Stocks] tab.
2. Click a stock entry from the Stocks list box.
3. Click the appropriate paper size from the Size list box. If you
click Custom, type in the paper width and length and click [OK].
The maximum and minimum values for width and length are
displayed in the dialog box.
Click the appropriate paper type from the Stock Type list box. The
available types may vary with printer model. If you click Custom, type
in a type name up to 30 characters and click [OK].
4. Click the appropriate color from the Color list box. If you click
Custom, type in a color name up to 30 characters and click
[OK].
5. Click the check box if the paper stock is drilled.
6. If displayed, type the paper weight value from 60 to 413. If
Weight is not displayed, enable it through the Masks options
under the Preference tab. Refer to the “Setting print
preferences” section, “Customizing or masking dialog box
options” subsection if required.
Note: You may define up to six paper stocks for models 96/4635/
180 NPS, and up to four paper stocks for models 4050/4090/4850/
4890/92C NPS.
The paper stock defined as Stock 1 is the default stock for the entire
document. You may specify the use of alternative stocks for selected
pages under the Special Pages tab.
Specifying tab stock
Note: This option is available with Models 96/4635/180 NPS
only.
Follow these steps:
1. From the Setup window, click the [Paper Stocks] tab.
2. Click a stock entry from the Stocks list box.
3. Click the appropriate paper size from the Size list box. If you
click Custom, type in the paper width and length and click [OK].
The maximum and minimum values for width and length are
displayed in the dialog box.
4. Click Full Cut Tab or Precut Tab from the Stock Type list box.
5. For a Precut Tab, type the number of tabs per set (from 1 to
255). The default is a 3-cut tab. Click [OK].
6. Click the appropriate color from the Color list box. If you click
Custom, type in a color name up to 30 characters and click
[OK].
7. Click the check box if the paper stock is drilled.
8. If displayed, type the paper weight (from 60 to 413).