Filter
Top Products
GUIDE TO SUBMITTING JOBS FROM THE CLIENT 4-1
4. 4Submitting print jobs using
Macintosh drivers
You can send documents to your DocuPrint printer from your
Macintosh in two ways:
• From your Macintosh drivers
DocuPrint allows you to transparently send ASCII files and
page description layout (PDL) files written in PostScript level 2
from your Macintosh to the printer. This capability is provided by
AppleTalk, which enables you to print directly to network
printers.
• From Xerox Document Submission (XDS) client software
XDS client software is intended for users of Apple Macintosh
computers running System 7.0 or greater. Your Macintosh must
be connected to the Ethernet network communication utility
using AppleTalk through EtherTalk Phase 2.
This chapter explains how to print from your Macintosh drivers. For
information on printing through the XDS software, refer to the Guide
to job submission for Macintosh. This guide is part of the Xerox
Production Print Services series.
For information on installation, refer to the chapter “Setting up
workstations” in this document.
To print a document from a Macintosh, you must first create or set up
a LaserWriter printer or an AdobePS printer, then you can submit the
job. You can also monitor or control printing from your Macintosh.
The following sections outline these procedures.