Filter
Top Products
XES Synergix 8825/8830/8850/8855 Digital Solution User Guide 135
Appendices (continued)
Appendix 6
The AccXES UP8 Controller (8855 Digital Solution) has four LED status
indicators as shown in Table 12 below.
Table 12. UP8 Controller LED status indicators
LED Number Color Indicated Condition
LED 1 Green "Ready." Indicates that the Controller is
powered up and ready to process incoming
jobs.
LED 2 Green "Busy." Indicates that the Controller is busy
processing a job.
LED 3 Yellow "Mismatch." Indicates that a media mismatch,
which may be blocking the print queue, has
occurred.
LED 4 Red "Attention." Indicates that a Printer or Finisher
fault has occurred. May indicate a paper jam,
out of toner condition, out of media condition,
or a communications problem with one of the
devices.
During power-on self test (POST), the firmware will light LEDs 2, 3, and 4.
After POST has successfully completed, LEDs 2, 3, and 4 will be switched
OFF, and LED 1 will be switched ON. If POST did not successfully complete,
all 4 LEDs will be switched OFF (i.e., they will be unlit).