Filter
Top Products
Maintenance
90 Xerox
®
Phaser
®
6022 Printer
User Guide
Adjustments and Maintenance Procedures
This section includes:
• Color Registration ................................................................................................................................................................ 90
• Adjusting Paper Type ......................................................................................................................................................... 91
• Adjusting the Bias Transfer Roller ................................................................................................................................. 91
• Adjusting the Fuser ............................................................................................................................................................. 92
• Refreshing the Bias Transfer Roller .............................................................................................................................. 92
• Adjusting the Altitude ........................................................................................................................................................ 92
Color Registration
The printer automatically adjusts the color registration when automatic adjustment is turned on. You
can also adjust color registration manually any time the printer is idle. You must adjust the color
registration any time the printer is moved. If you are having printing problems, adjust the color
registration.
Setting Automatic Color Registration
1. At the printer control panel, press the Menu button.
2. Use the Up and Down arrows to navigate to Admin Menu, then press OK.
3. Navigate to the Maintenance Menu, then press OK.
4. Select Auto Regi Adjust, then press OK.
5. Select On, then press OK.
6. To return to the main menu, press the Return button.
Performing an Automatic Color Registration Adjustment
Automatic color registration adjustment occurs every time a new toner cartridge is installed. You can run
this adjustment at other times as needed.
To perform an automatic color registration adjustment:
1. At the printer control panel, press the Menu button.
2. Use the Up and Down arrows to navigate to Admin Menu, then press OK.
3. Navigate to the Maintenance Menu, then press OK.
4. Navigate to Adjust ColorRegi, then press OK.
5. Select Auto Adjust, then press OK.
6. At the Are you sure? prompt, to select Yes, press the arrow buttons.
7. To begin the calibration, press OK.
8. To return to the main menu, press the Return button.