Filter
Top Products
Maintenance
Xerox® WorkCentre® 3655 Multifunction Printer 151
User Guide
Cleaning the Feed Rollers on the Duplex Automatic Document Feeder
1. Open the duplex automatic document feeder top cover.
2. With a clean, lint-free cloth moistened with water, wipe the feed rollers and the separation pad until
they are clean.
Note: If the duplex automatic document feeder feed rollers and separation pad get stained with
toner or debris, they can cause stains on the documents. To remove stains, use a soft lint-free cloth
dampened with a neutral detergent or water.
Cleaning the Interior
To prevent stains inside the printer that can deteriorate print quality, clean the interior of the printer
regularly. Clean the printer interior whenever you replace the drum cartridge.
After clearing paper jams or replacing a toner cartridge, inspect the inside of the printer before closing
the printer covers and doors.
• Remove any remaining pieces of paper or debris. For details, see Clearing Paper Jams on page 167.
• Remove any dust or stains with a dry, clean cloth.
WARNING: Never touch a labeled area on or near the heat roller in the fuser. You can get burned. If
a sheet of paper is wrapped around the heat roller, do not try to remove it immediately. Switch off
the printer immediately and wait 40 minutes for the fuser to cool. Try to remove the jam after the
printer has cooled.