Filter
Top Products
Maintenance
Xerox
®
WorkCentre
®
6655 Color Multifunction Printer 187
User Guide
Moving the Printer
WARNINGS:
• To lift the printer, always use at least two people to grasp the hand holds on each side of the
printer.
• To prevent dropping or tipping the printer, hold the printer between two people, with each
person using one hand underneath to hold the printer and the other hand on top to stabilize it.
• If the optional 550-Sheet Feeder is installed, uninstall it before you move the printer. If the
optional 550-Sheet Feeder is not fixed to the printer securely, it could fall to the ground and
cause injury.
To move the printer:
1. Always turn off the printer and wait for the printer to shut down. For details, see Turning the Printer
On and Off on page 39.
2. Disconnect the power cord and other cables from the back of the printer.
WARNING: To prevent electric shock, never touch the power plug with wet hands. When removing
the power cord, ensure that you pull the plug and not the cord. Pulling the cord can damage it, which
can lead to fire or electric shock.
3. Remove any paper or other media from the output tray. If the output tray extension is extended,
close it.