Filter
Top Products
Setting Up the Printer
Chapter 2: Setting Up the Printer ❖ 2-3
Printer Set-up
Physical Location
The printer should be installed on a smooth and flat surface.
There should be enough clearance around the printer to
allow air circulation around the vents to prevent the printer
from overheating, and also allow you to easily:
• Open the top door.
• Open the rear door to remove any jammed paper.
• Retrieve paper from the rear face up output.
Figure 2.1 Printer dimensions
A 14.2 inches / 360 mm
B 14.4 inches / 367 mm
C 7.2 inches / 184 mm
D 14.4 inches / 367 mm
4508-c02.frm Page 3 Thursday, June 6, 1996 12:04 PM