Filter
Top Products
Front Panel LED Messages
Chapter 6: Troubleshooting ❖ 6-3
READY OFF Printer is in OFF-LINE state. Press Front Panel key to place printer
ON-LINE.
Power cord not installed. Install power cord into printer, then
into wall outlet.
If problem persists, contact your
dealer or Xerox/Rank Xerox for
technical support.
READY ON Printer is in the Ready/Operational
state.
No corrective action required.
READY Blinking Printer is receiving or processing
data, or printing a print job.
No corrective action required.
MANUAL
(READY LED ON)
ON Manual feed slot is current paper
source for feeding.
No corrective action required.
MANUAL
(READY LED ON)
OFF Main and/or optional paper tray is
current paper source for feeding.
No corrective action required.
MANUAL
READY LED ON)
Blinking Manual feed slot is current paper
source for feeding, Auto Continue is
set to OFF, and there is processed
data ready to be printed.
Insert a sheet of paper into manual
feed slot.
Manual feed slot is current paper
source for feeding, Auto Continue is
set to ON, and there is processed
data ready to be printed.
Either wait 10 seconds for printer to
print job from main paper tray, or
insert a sheet of paper into manual
feed slot.
PAPER Blinking Main paper tray is empty or missing
from printer.
Load main paper tray with paper or
install paper tray into printer.
If problem persists, contact your
dealer or Xerox/Rank Xerox for
technical support.
ALL LEDs Blinking Unknown printer malfunction. Unplug printer from wall outlet for a
minute, then plug printer back into
wall outlet.
Table 6.1 LED indicator messages (continued)
LED
Function Name
LED
State
Problem Corrective Action
Table 6.1 Page 2 of 2
4508-c06.frm Page 3 Wednesday, May 22, 1996 7:48 AM