Filter
Top Products
Loading Paper
Chapter 4: Paper Loading and Orientation ❖ 4-11
6
When feeding envelopes, slide the end of the envelope
stopper over the end of the envelope stack. Refer to
Figure 4.3 on page 4-13 for correct envelope orientation.
The envelope stopper keeps envelopes from
backing out of the stack while feeding.
7
Because the MBF does not have a paper size sensor, you
must tell the printer which size paper is loaded via the
MBF Size item in the Control Panel’s Tray Menu. The
type of paper (plain, prepunched, letterhead,
transparency, etc.) must also be set, using the Tray
Menu’s MBF Type item.
See Chapter 3: Using the Control Panel for instructions on
accessing menus.
When you send a job to the printer that requests a
paper size that is different than the size currently in
the MBF, the printer will perform as discussed in
the section “Paper Size/Type Mismatch”
(page 4-23).