Filter
Top Products
Replacing the Fuser Cartridge/BTR
6-10 ❖ DocuPrint N17/N17b User Guide
16
Pull the tab to remove the BTR’s protective covering.
17
Re-insert the EP cartridge into the guide channels
marked by the arrows inside the top cover. Push in until it
clicks in place, then close the front cover.
18
Plug in the power cord. Press and hold Online and Menu
Down while powering ON the printer. Depress the
buttons until a row of black boxes are displayed on the
first line of the Control Panel display. This will reset the
Fuser Life counter and release the warning message.
After warming up for a few minutes, the Control Panel
displays the following message:
Ready
If the
Replace Fuser Cartridge
message still
appears, repeat Step 18.
If any other message is displayed, see Table 6.2 on
page 6-6.