Filter
Top Products
1.13
User Guide
USING THE AUTOMATIC PAPER FEEDER
1
• Load letterhead paper with the design
facing you. The top edge of the sheet with
the logo should enter the printer first.
Adjust the paper guides to the width of the
print media. Slide the paper guides until they
lightly touch both sides of the print media. Do
not tightly press the paper guides to the print
media edges, as the guides may bend the
media or provide too much resistance when
feeding.
Note: When you print a file from your
PC using the Automatic Paper Feeder,
make sure that you select the correct
paper source and paper size from your
software application before starting
your print job.
4
390ug.bk Page 13 Friday, April 28, 2000 12:13 PM