Filter
Top Products
4.5
User Guide
RECEIVING AUTOMATICALLY IN ANS/FAX MODE
4
Receiving Automatically in ANS/FAX
Mode
To use this mode, you must attach an
answering machine to the EXT. LINE jack on
the back of your machine.
Press the Receive Mode button until the
display indicates ANS/FAX. Any incoming
voice calls will be answered by the answering
machine. The caller can then leave a message
on the answering machine.
If a fax tone is detected on the line, the fax
receive mode is automatically activated.
1
Note: If DRPD Mode is selected, you
must first set DRPD Mode to OFF in the
SYSTEM DATA menu (Menu 01).
If you set your machine to ANS/FAX
mode and your answering machine is
switched off, or no answering machine
is connected to the Xerox WorkCentre
390, the machine will automatically go
into fax receive mode after six rings.
If your answering machine has a user-
selectable ring counter, set it to answer
incoming calls after one ring.
2
390ug.bk Page 5 Friday, April 28, 2000 12:13 PM