Filter
Top Products
User Guide
4.1
4
4
Chapter Four
RECEIVING A FAX
Reception Modes
When used as a Stand Alone fax machine,
your multi-function machine has five
reception modes as described below:
• FAX The machine answers an incoming
call and immediately goes into fax
receive mode.
• TEL/FAX The machine answers the
incoming call. If a fax signal is not
detected, the WorkCentre 390 sounds a
ringing tone to indicate a voice phone
call. If the external phone is not lifted
while the ringing tone is sounding, the
machine will switch to automatic fax
reception mode.
Tip: If you seldom use the fax line for
phone conversations, set the
WorkCentre 390 to either FAX mode
or TEL/FAX mode. In these modes,
the WorkCentre 390 answers
incoming calls and receives faxes
automatically.
390ug.bk Page 1 Friday, April 28, 2000 12:13 PM