8 www.xilinx.com SP605 Hardware User Guide
UG526 (v1.1.1) February 1, 2010
Chapter 1: SP605 Evaluation Board
Features
The SP605 board provides the following features:
• 1. Spartan-6 XC6SLX45T-3FGG484 FPGA
• 2. 128 MB DDR3 Component Memory
• 3. SPI x4 Flash
• 4. Linear BPI Flash
• 5. System ACE CF and CompactFlash Connector
• 6. USB JTAG
• 7. Clock Generation
♦ Fixed 200 MHz oscillator (differential)
♦ Socket with a 2.5V 27MHz oscillator (single-ended)
♦ SMA connectors (differential)
♦ SMA connectors for MGT clocking (differential)
• 8. Multi-Gigabit Transceivers (GTP MGTs)
♦ FMC LPC connector
♦ SMA
♦ PCIe
♦ SFP module connector
• 9. PCI Express Endpoint Connectivity
♦ Gen1 x1
• 10. SFP Module Connector
• 11. 10/100/1000 Tri-Speed Ethernet PHY
• 12. USB-to-UART Bridge
• 13. DVI CODEC
• 14. IIC Bus
♦ IIC EEPROM - 1KB
♦ DVI CODEC
♦ DVI connector
♦ FMC LPC connector
♦ SFP Module connector
• 15. Status LEDs
♦ Ethernet Status
♦ FPGA INIT
♦ FPGA DONE
• 16. User I/O
♦ USER LED GPIO
♦ User pushbuttons
♦ CPU Reset pushbutton
♦ User DIP switch - GPIO
♦ User SMA GPIO connectors