Yamaha DPX-530 Projector User Manual


 
27
Viewing ceiling mounted projector images
To view images projected by the ceiling mounted projector from the front:
When the projector is installed on the ceiling, the special ceiling mount bracket, which is commercially available, is required. Be sure to ask a
certified installation specialist for installation of the projector. Contact your dealer for details.
Yamaha assumes no responsibilities for any damage caused by use of other manufacturer s ceiling bracket and by inadequate installation
conditions even within the warranty period.
When installing the projector on the ceiling, set LOCATION in the SETUP menu to FRONT / CEILING.
Ask your installation specialist to provide a breaker. When you do not use the projector, be sure to shut down the main power by the breaker.
When the projector is installed on the ceiling, projected images may appear darker than those projected when the projector is installed on the
floor. This is not a malfunction.
Do not install the projector where the exhaust vents are exposed to air emitted by an air conditioning. Such installation may cause a
breakdown.
Do not install the projector near a fire alarm because it emits hot air from its exhaust vents.
Optional part
To view images projected on a translucent screen from behind:
Be sure to ask a certified installation specialist for installation of the projector. Contact your dealer for details.
To view images projected from behind the screen, set LOCATION in the SETUP menu to REAR/TABLE.
Dimension Drawings (unit: mm)
Ceiling mount bracket PMT-L71 (low ceilings)
PMT-H75 (high ceilings)
290
69
360
10212
Ceiling installation
11