Yamaha DPX-530 Projector User Manual


 
37
Important
Some computers aren’t compatible with the projector.
The projector's maximum resolution is 1024 × 576 pixels. It may not display images of higher resolutions than 1024 × 576
correctly.
If the resolution and frequency of your computer aren't shown on the table, find the compatible resolution and frequency by
changing the resolution of your computer.
Set D-SUB INPUT in the SIGNAL menu to RGB when inputting the HDTV signal as RGB signal.
In the case of XGA, the right side of the image may not appear. In this case, adjust TRACKING in the SIGNAL menu.
TV60 and TV50 are equivalent to 480i and 576i respectively. When these signals are input to the VIDEO or S-VIDEO signal,
the signal mode is indicated as TV60 or TV50. When they are input to the COMPONENT terminal, the signal mode is
indicated as 480i or 576i.
This projector cannot be connected to other equipment via an RGB-CS (4 line) connection.
Connectors
SERIAL (8-pin) D-SUB (Mini D-SUB 15-pin) DVI (DVI-D 24-pin with HDCP)
Pin No. Name I / O
1TXDIN
2––
3––
4 GND
5––
6––
7 RXD OUT
8––
1
35
2
68
Pin No. Spec.
1 R(RED) / CR
2 G(GREEN) / Y
3 B(BLUE) / CB
4 GND
5 GND
6 GND
7 GND
8 GND
9–
10 GND
11 GND
12 DDC Data
13 HD/CS
14 VD
15 DDC Clock
15
11
6
10
15
Pin No. Spec. Pin No. Spec.
1 DATA 2- 13
2 DATA 2+ 14 +5V Power
3 DATA 2 Shield 15 Ground
4 16 Hot Plug Detect
5 17 DATA 0-
6 DDC Clock 18 DATA 0+
7 DDC Data 19 DATA 0 Shield
8 20
9 DATA 1- 21
10 DATA 1+ 22 Clock Shield
11 DATA 1 Shield 23 Clock+
12–24Clock-
1724
16 9
8
1