Yamaha YSP-40D Projector Accessories User Manual


 
16 En
Installation
Using a metal wall bracket
You can use the optional metal wall bracket (such as SPM-
K30) to mount this unit on the wall in your listening room.
y
Refer to the instructions supplied with the metal bracket for
details on how to attach the metal bracket to the wall or how to
attach this unit to the metal bracket.
Using a stand
You can mount your TV on a stand placed on a
commercially available rack and install this unit under
your TV.
y
Refer to the instructions supplied with the stand for details on
how to install the stand or how to mount and the TV on the stand.
Using a rack
You can install this unit either above or under your TV in a
commercially available rack.
Make sure that the rack is large enough to allow adequate
ventilation space around this unit (see page 14) and that it is
strong enough to support the weight of both this unit and your TV.
Affixing this unit
Peel off the film from each of the four supplied fasteners
and then secure them to the bottom four corners of this
unit and the top of the rack, etc.
Do not install this unit on top of a slanted surface. This unit may
fall over and cause injury.
Make sure you wipe the surface of the rack, etc. before securing
the fasteners. Applying the tape to a dirty or wet surface will
weaken the sticking power of the tape, and this unit may fall as
a result.
92
112
730
4- 7
24- 7x22
150
355 150355
This unit
TV
Metal wall bracket
YSP-40D
SPM-K30 (Option)
(mm)
TV
This unit
Stand
Note
Notes
When this unit is installed above your TV
When this unit is installed under your TV
2
1
This unit
Peel off
the film
Fasteners
Peel off
the pad
on the
bottom