Filter
Top Products
Using this manual
5 En
INTRODUCTION
English
• This manual describes how to connect and operate this unit. For details regarding the operation of external components, refer to the
supplied owner’s manual for each component.
• Operations in this manual use keys on the supplied remote control of this unit unless otherwise specified.
• y indicates a tip for your operation.
• This manual is printed prior to production. Designs and specifications are subject to change in part as a result of improvements, etc. In
case of differences between the manual and the product, the product has priority.
1 Install this unit in your listening room.
See “Installation” on page 14.
2 Connect this unit to your TV and other external components.
See “Connections” on page 17.
3 Prepare the remote control and turn on the power of this unit.
See “Getting started” on page 29.
4 Run AUTO SETUP.
See “AUTO SETUP (IntelliBeam)” on page 34.
5 Play back a source.
See “Playback” on page 44.
6 Change the beam modes and/or CINEMA DSP settings.
See “Enjoying surround sound” on page 60.
7 Run MANUAL SETUP to fine-tune settings and/or set remote control codes.
See “MANUAL SETUP” on page 80 and “Remote control features” on page 107.
Using this manual
Notes
If you want to make additional settings
and adjustments