Filter
Top Products
25 En
Connections
PREPARATION
English
If your component supports optical digital connections, connect the optical digital output jack on your component
(e.g., DVD player/recorder) to the AUX 1 OPTICAL DIGITAL IN jack on this unit. If your component does not support
optical digital connections, connect the coaxial digital output jack on your component to the AUX 2 COAXIAL
DIGITAL IN jack on this unit. If your component does not support any digital connections, connect the analog audio
output jacks on your component (e.g., VCR) to the AUX 1 AUDIO IN jacks on this unit.
For video connection, connect the video output jack of your DVD player/recorder, etc. to the DVD/AUX 2 VIDEO IN (or
AUX 1 VIDEO IN) jack of this unit. If your DVD player/recorder, etc. has component video output jacks, connect the
component video output jacks of your DVD player/recorder, etc. to the DVD/AUX 2 COMPONENT VIDEO IN jacks of
this unit. Once the component video connection is made, you can enjoy images with better resolution.
y
To prevent the optical cable from being unplugged, affix the optical cable in the supplied cable clamp (see page 18).
If you make analog and digital audio connections at the same time as shown in the illustration below, the digital audio signals input at
the AUX 1 OPTICAL DIGITAL IN or AUX 2 COAXIAL DIGITAL IN jack take priority over the analog audio signals input at the AUX
1 AUDIO IN jacks.
Video pin cable
Component video pin cable
Audio pin cable
Optical cable
Digital audio pin cable
Connecting other external components
Note
AUX 1TV/STB
AUDIO IN
STB DVD/AUX 2 AUX 1
VIDEO IN
SUBWOOFER
COMPONENTCOMPONENT
OPTICAL
COAXIAL
DVD AUX 2
AUX 1TV/STB
DIGITAL IN
Optical
digital
output
Video signal to
the TV
DVD player/recorder, VCR,
game console, CD player, etc.
Rear panel of this unit
Analog
audio
output
LR
Coaxial
digital
output
Video
output
Component
video output
*
You can only
make either a
composite or a
component
connection.
Video
output
**
Video Audio