Filter
Top Products
10
Chapter 1 PPI/ZGL SETUP Menu
PPI/ZGL SETUP Menu
Enable* Disable
560K Bytes* 160-3600K Bytes
PPI/ZGL SETUP
1
ZPL Compatible
126*
Command Prefix
Label Prefix
LP+ Text Mode
Delimiter
94*
ZPL-II* ZPL-I
Preparser Command
MC Label Fmt
Preparser Port
PQ Label Fmt
List Format*
Label Buf Size
Host Form Length
1-255
1-255
44* 1-255
Absorb*
HS Command* JA Command
Disable* Parallel
List Format* Bitmap Format
Auto Pass-thru
Serial
Left Position
0* -1000 to 1000
Notes:
* = Default.
Italicized items are available when you enable Admin User (in
the PRINTER CONTROL menu).
1
When substituting a Zebra Xi III model printer with a
SL5000r/T5000r printer, refer to the menu conversion in
Appendix F.
2
Factory default for printers with 203 dpi printhead = 207 dpi.
Factory default for printers with 300 dpi printhead = 301 dpi.
3
Range for printers with 203 dpi printhead = 201 - 220 dpi.
Range for printers with 300 dpi printhead = 301 - 330 dpi.
4
Each character set will contain different individual
characters. PPI uses scalable fonts rather than bitmapped
fonts.
Top Position
0 dots/inch*
-100 to 100 dots/inch
Resolution Mode
Full
*
Half
Vertical Adjust
Disable*
Enable
Vertical Density
207
*
2
201-220
3
IS Label Format
List Format* Bitmap Format
ZGL Quiet
Bitmap Format
(Continued on next
page)
Ethernet
Ignore
HS & JA Command