Filter
Top Products
37
A ZGL Menu Conversions
When substituting a Zebra Xi III model printer with a SL5000r/T5000r printer,
refer to the ZGL conversion table below.
Table 2: ZGL Menu
Zebra
Xi lll
Series SL5000r/T5000r with ZGL Emulation
Darkness - (0 to +30) +10*. Darkness of
image on label.
QUICK SETUP Menu,
Print Intensity
- (-15 to +15) -3*
Tear Off - (-120 to +120) +0*. Adjusts Tear
Off, Peel-Off and Cut position in Dot Rows.
QUICK SETUP Menu,
Paper Feed Shift - (-0.50 to+12.8) 0.00 Inch*. Adjusts
Tear Off, Tear-Off Strip, Peel-Off & Cut position in Inches
or MM.
Print Mode –
Rewind
Tear-Off
Peel-Off
Cutter
Applicator
QUICK SETUP Menu,
Media Handling -
Continuous (same as Zebra Rewind)
Tear-Off Strip* (same as Zebra Tear-Off)
Peel-Off (same as Zebra Peel-Off)
Cut (same as Zebra Cutter)
Tear-Off (similar to Zebra Peel-Off)
N/A Applicator N/A on SL5000r/T5000r
Media Type - Continuous*, Non-Continu-
ous.
Sensor Type -
Web - Liner gap, notch or hole. NOTE: Media
Type must = Non-Continuous.
Mark - Black mark on underside of label
(Media Type must = Non-Continuous).
QUICK SETUP Menu,
Gap/Mark Sensor-
Disable*- Same as Zebra Continuous Media Type (no
label length indicators).
Non-Continuous N/A. Assumed when Gap, Adv Gap or
Adv Notch selected.
NOTE: Use Gap, Adv Gap or Adv Notch for Zebra Web.
NOTE: No Media Type setting is available or required.
Gap - Liner gap, notch or hole.
Adv Gap - Use w/dark background labels
Adv Notch - Use with dark background labels.
Mark - Black mark on underside of label. No Media Type
setting avail. or required.
Print Method –
Transfer*- Use of ribbon.
Direct - No ribbon used.
QUICK SETUP Menu,
Print Mode - Transfer* or Direct.