Zebra Technologies UMAN-QLP-001 Printer User Manual


  Open as PDF
of 86
 
13
QL Plus Series User Guide
The LI72 is a wall mounted fast charger with universal 110
to 230, 50-60 Hz. VAC input. Multiple A.C. plug configurations
comply with most international standards. This charger is in-
tended for use with Lithium Ion (Li-ion) batteries. QL series
printers only utilize Li-ion batteries.
The LI72 is supplied in two variations: a two wire version
and a three-wire version. The three-wire version offers more
intelligent charging features and is used with more-recently
produced printers..
Both of the LI72 models will charge a battery pack as fast as
its charge level will allow, and then switch over to a mainte-
nance charge to keep the charge at its maximum.
Charging Battery Packs with the LI72 Two-Wire Version
Plug the LI72 into the appropriate A.C. wall receptacle, and
then insert the charge cable into the battery pack charger jack.
The charge indicator LED will indicate the status of the char-
ger as follows:
Indicator
Charger
Function
Charger Status
Steady
Charging. Battery Pack is undergoing a
fast charge
Slow Flashing (1 HZ) Maintain Battery is ready for use
Rapid Flashing (4 Hz) Error
The battery may have an
internal short, or its charge
monitoring circuitry may be
malfunctioning. The battery
pack should not be used any
further.
Donotchargebatterieswiththetwo-wireLI72modelwhileprinting.
Attemptingtoprintwhilechargingcanresultinimproperlycharged
batteries.
 Caution•Donotleavethetwo-wirechargerpluggedintoabattery
packforaprolongedperiodoftimewhenitisinstalledintheprinter
andhasreachedthemaintenancechargestate.Chargingabattery
wheninstalledinaprinterforaprolongedperiodoftimecouldcause
damagetotheprinter.
 previous next