Zebra Technologies UMAN-QLP-001 Printer User Manual


  Open as PDF
of 86
 
40
QL Plus Series User Guide
0336
Important Notice:
This device is a portable RF printer intended
for commercial and industrial use in all EU
and EFTA member states except in France
where restrictive use applies.
Zebra 802.11b WLAN Radio Module
The following section only applies when the Zebra 802.11b WLAN radio module
(With FCC ID: I28MD-ZLAN11B) is installed in a QL Plus series printer (note that only one of the radio op-
tions can be installed in the printer at one time). Other than conditions specified elsewhere in this manual,
only one of the radio options can be installed in the printer at one time and the antenna used for these
transmitters must not be co-located or must not operate in conjunction with any other antenna.
QL Plus models have the FCC ID number on a label on the back of the unit.
Caution•
Theradiatedoutputpowerofthisinternal802.11bradio
isfarbelowtheFCCradiofrequencyexposurelimits.Nevertheless,
thisradiomustbeusedinsuchamannerthattheantennais2.5cm.
orfurtherfromthehumanbody.Theradioandantennaaremounted
internallyinthisprintersuchthatwhentheprinteriswornwiththe
backoftheprinteragainstthebodyandthefrontoftheprinter(where
paperexits)awayfromthebody,thenthe2.5cmdistancebetween
theantennaandtheusersbodywillbemet.Donotusetheprinterin
anunauthorizedmanner.
European Regulatory Information for this Radio
AT BE CY CZ DK
EE FI FR DE GR
HU IE IT LV LT
LU MT NL PL PT
SK SI ES SE GB
Note: -Member states in the EU with restrictive use for this device are crossed
out!
This device is also authorized for use in all EFTA member states (CH, IS, LI, NO)
 previous next