Zebra Technologies UMAN-QLP-001 Printer User Manual


  Open as PDF
of 86
 
18
QL Plus Series User Guide
Loading the Media
YoucanoperateQLPlusprintersinoneoftwodifferent
modes: Tear-Off or Peel-Off. Tear-Off mode allows you to tear
off each label (or a strip of labels) after it is printed. In Peel-Off
mode, the backing material is peeled away from the label as it
is printed. After you remove this label, the next one is printed.
QL 420 Plus and QL 220 Plus Printers
1. Open the printer: Refer to Figure 6 (QL 420 shown).
• Pressthelatchreleasebuttononthesideoftheprinter
as shown at “1” below. The latch assembly will flip open
automatically
• OntheQL420Plusonly,pullupthelatchassemblycom-
pletely as shown at “2” to unlatch the Media Cover.
• RotatetheMediaCoverbackasshownat“3”,exposing
the media compartment and the adjustable media sup-
ports.
Media Supports
Figure 6: Opening the QL 420 Plus & QL 220 Plus
Media Compartment
 previous next