Filter
Top Products
26 Zoom AP+2 User’s Guide
2
22
2 From the AP+2
Web Management Interface
, click
Wireless
in the left navigational menu, then click
WEP Configuration
to open the WEP Configuration page.
3
33
3 Use the
WEP Mode
drop-town list to specify whether you
want to use 64-bit or 128-bit encryption and whether you want
to manually enter hexadecimal keys or have them automatically
generated based on a passphrase. (Note that 128-bit encryption
is more secure, but 64-bit can be faster, depending on the
devices on your network.)
!
64-bit manually
– When you select this option, the screen
changes so you can enter up to four WEP keys manually.
Select the option button for the key you want to enter (for
example,
Key1
), then enter five hexadecimal pairs in the
boxes provided. The range for hexadecimal characters is
0-9 and A-F. Once you have entered the keys you want,
click the
Save Changes
button
Note:
The 64-bit manually options uses only one key to encrypt the
data and the receiving device will use the same key to decrypt it. This
means that all devices must have the exact same keys in the exact same
order. However, each device can specify which key it wants to use for
encryption so that all devices are not using the same keys. All four keys
should be filled in.