Filter
Top Products
Chapter 5: Advanced Options
39
Using the LAN Settings Page
Use the LAN Settings page to specify local area network settings
for your AP+2.
By default, the AP+2 is set up to use a static IP address
(
10.0.0.200
) to access its
Web Management Interface
. Any
requests from LAN devices for DHCP information will be passed
through to a router/DHCP server, which will send IP address
information through the AP+2 back to the LAN device.
To open the LAN Settings page, click
LAN
in the left-navigational
menu, then click
LAN Settings
.
To specify LAN settings
1
11
1 [Optional] Enter a name for the AP+2. By default, it is named
Zoom AP
.
2
22
2 Specify whether you want to use dynamic or static IP
addressing by selecting one of the following option buttons:
!
Configure a Static IP Address.
Select this option button
if you want to use a static IP address to access the
Web
Management Interface
of the AP+2. This is the default
setting. With this option selected, wireless devices will
receive their IP addresses from a DHCP server on your
network (for example, a router). If you want the AP+2 to
assign the IP addresses to the wireless devices, select the
next option.