Filter
Top Products
Chapter 4: Setting Security 27
!
64-bit automatically
– Select this option if you want to
use a passphrase (password) to define the hexadecimal
keys. When you select this option, the screen changes so
you can specify a passphrase. The passphrase can be
greater or less than five characters (it cannot be exactly
five). When complete, click the
Save Changes
button. All
four hexadecimal keys are generated automatically and
appear on the screen. (Be sure to write down the
hexadecimal keys—you may need them later.)
Tip!
If you are using the AP+2 with a device that does not allow you to
use a passphrase for WEP key definition, or if that device’s passphrase
does not generate the same hexadecimal characters for the keys, copy
the hexadecimal keys generated by the AP+2 an enter them in the
appropriate fields on the other device.
!
128-bit manually
– When you select this option, the
screen changes so you can enter a WEP key manually.
Enter 13 hexadecimal pairs in the boxes provided. The
range for hexadecimal characters is 0-9 and A-F. Once you
have entered the key, click
Save Changes
.