Filter
Top Products
Appendix C: LED Description 63
Appendix C
LED Description
The following table describes each of the LEDs on the top of the
AP+2 and what each light means when it is flashing and/or steady.
LED What it does Flashing/Steady Status
TX/RX Shows the
status of the
AP+2’s wireless
link
When flashing green, the AP+2 is
sending or receiving data wirelessly.
LINK/ACT Shows the
status of the
AP+2’s Ethernet
LAN connection
•
If it flashes green and then
becomes steady green, the AP+2
has established a valid 100 Mbps
Ethernet connection.
•
If it flashes orange and then
becomes steady orange, the
AP+2 has established a valid 10
Mbps Ethernet connection.
•
When flashing (regardless of
color), the AP+2 is sending or
receiving data over the Ethernet
LAN.
PWR Shows whether
the AP+2 is
powered on.
When steady green, the AP+2 is
powered on.