Filter
Top Products
Chapter 5: Advanced Options
33
The following table lists each page that you can access from the
Web Management Interface
. Each page is described in detail
later in this chapter.
Menu Item Page Use this Page to...
Password
Setting
Specify a password to restrict access to the
AP+2’s
Web Management Interface
.
System
Operation
Mode
Specify whether to use the AP+2 as an
access point, Ethernet client/client bridge,
or repeater. (Access point is the default.)
LAN LAN Settings Specify whether you want the AP+2 to act
as a DHCP Client or DHCP Server. In
DHCP Client mode, the AP+2 will receive
IP addresses from a router and pass them
through to the devices on your wireless
network. In DHCP Server mode, the AP+2
will assign IP addresses to devices on your
network.
By default, the AP+2 is set to DHCP Client
mode.
Settings Specify wireless settings, such as SSID
and channel information. The settings you
can specify on this page depend on the
operation mode of the AP+2.
WEP
Configuration
Specify WEP encryption settings for the
AP+2 to protect the wireless network from
unauthorized use. By default, no security is
applied.
WPA
Configuration
Specify WPA encryption settings for the
AP+2 to protect the wireless network from
unauthorized use. By default, no security is
applied.
Client List View a list of the devices that are currently
connected to your wireless network.
Wireless
Site Survey Have the AP+2 search for and display
available wireless access points. This page
is only accessible when the
Operating
Mode
is set to
Client Bridge
(Infrastructure)
.
Table continued on next page...