Filter
Top Products
Prestige 2602RL-D3A Support Notes
All contents copyright (c) 2007 ZyXEL Communications Corporation.
102
Select RFC 2833 to send the DTMF tones in RTP packets.
Select PCM (Pulse Code Modulation) to include the DTMF tones in the
voice data stream. This method works best when you are using a codec that
does not use compression (like G.711). Codecs that use compression (like
G.729) could distort the tones.
Select SIP INFO to send the DTMF tones in SIP messages.
MWI
(Message
Waiting
Indication)
Enable Message Waiting Indication (MWI) to have your phone give you a
message–waiting (beeping) dial tone when you have a voice message(s).
Your voice service provider must have a messaging system that supports
this feature.
Expiration
Time
Use this field to set how long the SIP server should continue providing the
message waiting service after receiving a SIP SUBSCRIBE message from
the Prestige. The SIP server stops providing the message waiting service if
it has not received another SIP SUBSCRIBE message from the Prestige
before this time period expires.
Call Forward
Table
Select which call forwarding table you want the Prestige to use to block or
redirect calls. You can use a different call forwarding table for each SIP
account or use the same call forwarding table for both.
Back
Click Back to return to the previous screen without saving configuration
changes.
Apply
Click Apply to save your changes back to the Prestige.
Phone book Speed dial
Prestige allows you to configure up to 10 SIP numbers in the phone book for speed dial.