Filter
Top Products
Prestige 2602RL-D3A Support Notes
All contents copyright (c) 2007 ZyXEL Communications Corporation.
75
Two new protocol filter interfaces in menu 3.2.1 allow you to accept or deny LAN packets from/to the IP alias
1 and IP alias 2 go through the Prestige. The filter set in menu 3.1 is used for main network configured in menu
3.2.
IP Alias Setup
1. Edit the first network in menu 3.2 by configuring the Prestige's first LAN IP address.
Menu 3.2 - TCP/IP and DHCP Setup
DHCP Setup
DHCP= Server
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
Remote DHCP Server= N/A
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= None
Version= N/A
Multicast= None
IP Policies=
Edit IP Alias= Yes
Press ENTER to Confirm or ESC to Cancel:
Key Settings:
DHCP Setup
If the Prestige's DHCP server is enabled, the IP pool for the clients can be any of the
three networks.
TCP/IP Setup
Enter the first LAN IP address for the Prestige. This will create the first route in the
enif0 interface.