Filter
Top Products
Prestige 2602RL-D3A Support Notes
All contents copyright (c) 2007 ZyXEL Communications Corporation.
107
Each field's detail description of the page is listed below.
Label
Description
SIP TOS
Priority
Type a priority for voice transmissions. The Prestige applies Type of Service
priority tags with this priority to voice traffic that it transmits.
RTP TOS
Priority
Type a priority for voice transmissions. The Prestige applies Type of Service
priority tags with this priority to RTP traffic that it transmits.
Voice VLAN
ID
Enable VLAN tagging if the Prestige needs to be a member of a VLAN group
in order to communicate with the SIP server. Your LAN and gateway must
also be set up to use VLAN tags. Some switches also give priority to voice
traffic based on its VLAN tag.
Type the VLAN ID (VID) from 1 to 4095 for the Prestige to add to voice
Ethernet frames that it sends out to the network.
Disable VLAN tagging if the Prestige does not need to be a member of a
VLAN group to communicate with the SIP server.
Apply
Click Apply to save your changes back to the Prestige.
Call Forwarding setup
Call forwarding function allows users to determine handling of incoming calls. For example, a user may wish to
decide that all incoming calls will ring his cell phone as well. The following screenshot shows how users can
use this screen to configure the Prestige to block or redirect calls. You can configure a different call forwarding
table for each SIP account or use the same call forwarding table for both.