ZyXEL Communications 2602RL-D3A Modem User Manual


 
Prestige 2602RL-D3A Support Notes
All contents copyright (c) 2007 ZyXEL Communications Corporation.
123
on phone keypad, it will implement this feature.
Hot Line (Auto Dial)
This feature enables the device to make a call to a predefined number as soon as the phone is off hook.
Application Scenario:
1. Configure the Hot Line setting first.
2. A lifts phone.
3. A will automatically dial the preconfigured number.
You may configure Hot Line (Auto Dial) easily on web GUI: VoIP > Phone > Analog Phone > Advanced
Or by CLI command setting.
Below CLI commands are used to configure the Hot Line:
voice config fxs autodial enable // Enable Hot Line (Auto Dial) Feature
voice config fxs autodial number // Set Hot Line number
voice config fxs diallonginterval // Set the interval between phone picking up and dialing out
For example, if you want SIP1 phone call 888888 automatically after the phone is off hook and without
pressing any button on the phone keypad in 5 seconds.
Below CLI command could implement it:
ras> voice config fxs index 1
ras> voice config fxs autodialenable 1 enable
ras> voice config fxs autodialnumber 1 888888
ras> voice config fxs diallonginterval 1 5
ras> voice config fxs save 1