Filter
Top Products
Prestige 2602RL-D3A Support Notes
All contents copyright (c) 2007 ZyXEL Communications Corporation.
131
the opposite direction), the checksums are recomputed, and the packet is delivered to its true destination. This is
because SUA keeps a table of the IP addresses and port numbers of the local systems currently using it.
What is the difference between NAT and SUA?
NAT is a generic name defined in RFC 1631 'The IP Network Address Translator (NAT)'. SUA (Internet
Single User Account) is ZyXEL's implementation and trade name for functioning PAT which is a specific type
of NAT. SUA (or PAT for NAT) translates address into port mapping.
The primary motivation for RFC 1631 is that there is not enough IP address to go around. In addition, many
corporations simply did not bother to obtain legal (globally unique) IP addresses for their networks and now
finding themselves unable to connect to the Internet.
Basically, NAT is a process of translating one address to another. A NAT implementation can be as simple as
substituting an IP address with another. This allows a network to rectify the illegal address problem mentioned
above without going through each and every host.
The design goal of ZyXEL's SUA is to minimize the Internet access cost in a small office environment by using
a single IP address to represent the multiple hosts inside. It does more than IP address translation, so that
multiple hosts on the LAN can access the Internet at the same time.
How many network users can the SUA/NAT support?
The Prestige does not limit the number of the users but the number of the sessions. The Prestige supports 1024
sessions that you can use the 'ip nat iface enif0 disp' command in menu 24.8 to view the current active sessions.
What are Device filters and Protocol filters?
In ZyNOS, the filters have been separated into two groups. One group is called 'device filter group', and the
other is called 'protocol filter group'. Generic filters belong to the 'device filter group', TCP/IP and IPX filters
belong to the 'protocol filter group'.
Why can't I configure device filters or protocol filters?
In ZyNOS, you can not mix different filter groups in the same filter set.