Filter
Top Products
Prestige 2602RL-D3A Support Notes
All contents copyright (c) 2007 ZyXEL Communications Corporation.
93
After configuring the PSTN setup, click “Apply” to save changes back to P2602RL – D3A.
Note: It is recommended to configure your local emergency services such as Police Dept, Fire Dept, Emergency
Medical services phone number in this field. Thus in any cases, these unit can be reach in case of emergency by
dialing their number without prefix, regardless if there are power loss.
How to connect Lifeline and DSL connection
To use both VOIP and regular phone service with P2602RL-D3A’s lifeline feature. You will need to connect
ADSL line and phone line appropriately and make proper configuration.
Making the correct connection it allows you to still receive phone calls while someone else is making outgoing
VoIP call though Prestige’s 2 pots port, the following figure shows you how to connect your phone and
DSL service.
If your ADSL line type is Splitter type you ISP will provide you with splitter otherwise it should be splitterless.
For correct info you may check with your service provider as for which type of line you have.
Firgure 1 Splitter type
1. The P2602RL-D3A includes a DSL cable and a RJ-11 cable. Connect the DSL cable to the DSL
port and connect RJ-11 to Lifeline port.
2. Connect the RJ11 to the splitter phone jack or a telephone wall jack
3. Connect the DSL cable to the splitter modem jack or ADSL line
4. Connect the splitter jack where it label Line to ADSL line from the ISP.