Filter
Top Products
Prestige 2602RL-D3A Support Notes
All contents copyright (c) 2007 ZyXEL Communications Corporation.
98
To configure the phone port setting, please follow the below step.
Step 1. Open the web browser from your workstation to connect to the Prestige by entering the Management IP
address of the Prestige. The default management IP of Prestige is 192.168.1.1.
Step 2. Enter the administrator password appear on the page of login and click on login. The default is '1234'
Step 3. On the left column click on VoIP -> Phone -> Analog Phone -> Advanced Setup to bring you to voice
function menu.
Step 4. Change the phone port parameter as you desired and click Apply when you are finish to save and let the
setting to take effect.
Each field's detail description is listed below.
Label
Description
Speaking
Volume
Use this field to set the loudness that the Prestige uses for the speech signal
that it sends to the peer device. -1 is the quietest and 1 is the loudest.
Listening
Volume
Use this field to set the loudness that the Prestige uses for the speech signal
that it receives from the peer device and sends to your phone. -1 is the