Filter
Top Products
Chapter 21 Multicast
GS-3012/GS-3012F User’s Guide
156
" Your switch automatically creates a static VLAN (with the same VID) when you
create a multicast VLAN in this screen.
Figure 77 MVR
The following table describes the related labels in this screen.
Table 54 MVR
LABEL DESCRIPTION
Active Select this check box to enable MVR to allow one single multicast VLAN to be
shared among different subscriber VLANs on the network.
Name Enter a descriptive name (up to 32 printable ASCII characters) for identification
purposes.
Multicast VLAN
ID
Enter the VLAN ID (1 to 4094) of the multicast VLAN.
802.1p Priority Select a priority level (0-7) with which the switch replaces the priority in outgoing
IGMP control packets (belonging to this multicast VLAN).