Filter
Top Products
Chapter 32 Introducing the Commands
GS-3012/GS-3012F User’s Guide
231
server <ip> inactive Disables a syslog server
entry.
13
level <0-7> Sets which severity level(s)
of logs are sent to this syslog
server. A lower number is
more critical.
13
type <system,
interface, switch,
authentication,
ip>
Sets the device to generate a
category of logs.
13
type <system,
interface, switch,
authentication,
ip>
facility <0-7> Sets the facility (file) on the
syslog server to which the
switch sends a category of
logs.
13
time <Hour:Min:Sec> Sets the time in hour, minute
and second format.
13
date <month/day/
year>
Sets the date in year, month
and day format.
13
timezone <-
1200|...|1200>
Selects the time difference
between UTC (formerly
known as GMT) and your
time zone.
13
timesync <daytime|time|ntp> Sets the time server protocol. 13
server <ip> Sets the IP address of your
time server.
13
trunk <T1|T2|T3|T4|T5|T6
>
Activates a trunk group. 13
<T1|T2|T3|T4|T5|T6
>interface <port-
list>
Adds a port(s) to the
specified trunk group.
13
<T1|T2|T3|T4|T5|T6
>lacp
Enables LACP for a trunk
group.
13
interface <port-
list> timeout
<lacp-timeout>
Defines the port number and
LACP timeout period.
13
vlan <1-4094> Enters the VLAN
configuration mode. See
Section 32.10.4 on page 232
for more information.
13
vlan-type <802.1q|port-
based>
Specifies the VLAN type. 13
vlan1q gvrp Allows VLAN groups beyond
the local switch.
13
port-isolation Enables port isolation. 13
Table 83 Command Summary: Configure Mode (continued)
COMMAND DESCRIPTION PRIVILEGE