Filter
Top Products
GS-3012/GS-3012F User’s Guide
165
CHAPTER 23
Routing Protocol
This chapter shows you how to configure the routing functions.
23.1 Static Route Overview
Static routes tell the switch how to forward IP traffic when you configure the TCP/IP
parameters manually.
Click Routing Protocol in the navigation panel and then Static Routing to display the screen
as shown.
Figure 84 Static Routing
The following table describes the related labels you use to create a static route.
Table 57 Static Routing
LABEL DESCRIPTION
Active This field allows you to activate/deactivate this static route.
Name Enter a descriptive name for this route. This is for identification purpose only.
Destination
IP Address
This parameter specifies the IP network address of the final destination. Routing is
always based on network number. If you need to specify a route to a single host, use a
subnet mask of 255.255.255.255 in the subnet mask field to force the network number
to be identical to the host ID.
IP Subnet
Mask
Enter the subnet mask for this destination.