Filter
Top Products
Chapter 24 Maintenance
GS-3012/GS-3012F User’s Guide
173
24.8.3 GUI-based FTP Clients
The following table describes some of the commands that you may see in GUI-based FTP
clients.
24.8.4 FTP Restrictions
FTP will not work when:
• FTP service is disabled in the Access Control screen.
• The IP address(es) in the Secured Client Set in the Remote Management screen does not
match the client IP address. If it does not match, the switch will disconnect the Telnet
session immediately
Table 61 General Commands for GUI-based FTP Clients
COMMAND DESCRIPTION
Host Address Enter the address of the host server.
Login Type Anonymous.
This is when a user I.D. and password is automatically supplied to the
server for anonymous access. Anonymous logins will work only if your
ISP or service administrator has enabled this option.
Normal.
The server requires a unique User ID and Password to login.
Transfer Type Transfer files in either ASCII (plain text format) or in binary mode.
Configuration and firmware files should be transferred in binary mode.
Initial Remote Directory Specify the default remote directory (path).
Initial Local Directory Specify the default local directory (path).