Chapter 4 ZyXEL Utility: Station Mode
NWD2705 User’s Guide
42
4.4.1.3 WPA-PSK/WPA2-PSK
Configure WPA-PSK/WPA2-PSK security in this screen.
Figure 30 Security Setting: WPA-PSK/WPA2-PSK
The following table describes the labels in this screen.
Table 10 Security Setting: WPA-PSK/WPA2-PSK
LABEL DESCRIPTION
Encryption Type The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are the same.
The only difference between the two is that WPA-PSK/WPA2-PSK uses a simple common
password, instead of user-specific credentials.
Select the encryption type (TKIP or AES) for data encryption.
Refer to Section 3.3.2 on page 27 for more information.
Pre-Shared Key Type a pre-shared key (same as the AP or peer device) of between 8 and 63 case-
sensitive ASCII characters (including spaces and symbols) or 64 hexadecimal characters.
Back Click Back to go to the Site Survey screen to select and connect to another network.
Next Click Next to confirm your selections and advance to the Summary screen. Refer to
Section 4.4.2 on page 43.
Exit Click Exit to return to the Site Survey screen without saving.