Filter
Top Products
Chapter 4 ZyXEL Utility: Station Mode
NWD2705 User’s Guide
45
4.5.1 Adding a New Profile
Follow the steps below to add a new profile.
1 Click Add in the Profile screen. An Add New Profile screen displays as shown next.
Figure 33 Profile: Add a New Profile
The following table describes the labels in this screen.
Table 13 Profile: Add a New Profile
LABEL DESCRIPTION
Add New Profile
Profile Name Enter a descriptive name in this field.
SSID Select an available wireless device in the Scan Info table and click Select, or enter the
SSID of the wireless device to which you want to associate in this field manually.
Otherwise, enter Any to have the NWD2705 associate to any AP or roam between any
infrastructure wireless networks.
Network Type Select Infrastructure to associate to an AP.
Next Click Next to go to the next screen.
Exit Click Exit to go back to the previous screen without saving.
Scan Info This table displays the information of the available wireless networks within the
transmission range.
or
denotes that the wireless device is in infrastructure mode and the wireless
security is activated.
denotes that the wireless device is in infrastructure mode but the wireless security
is deactivated.
SSID This field displays the SSID (Service Set IDentifier) of each AP or peer device.
Scan Click Scan to search for available wireless devices within transmission range.
Select Select an available wireless device in the table and click Select to add it to this profile.
Whenever you activate this profile, the NWD2705 associates to the selected wireless
network only.