A SERVICE OF

logo

Open as PDF
next previous
Left Lower Cover
Caution
Be careful not to damage the plastic guides on the inside of the lower left
cover. They are part of the Duplex Unit paper path.
1 Remove the Diverter Assembly access door (see Figure 6-13).
2 Remove (2) screws, CH102 (Figure 6-7, callout 1)
3 Press down firmly on the top cover outer ends to release the retaining tabs
on the inside of the cover (Figure 6-7, callout 2), and the retaining tabs at
the lower edge of the cover (Figure 6-7, callout 3).
4 Pull the cover away from the chassis, left side first.
To Reinstall:
1 Tuck the right side of the cover behind the plastic edge piece first.
2 Slide the cover toward the chassis and insert the two retaining tabs into
position. Lift up to snap the cover into place.
Left Lower Cover
Figure 6-7
6-22 Removal and Replacement